Fill Level Indicators

• Display of the liquid level for corrosive, toxic or flammable media with separation between measurement and display compartments
• The gauge is continous and resistant to vibration
• No clouding of display elements
• Alarm contacts can be attached at any point along the gauge.
• Great reliability even at high temperatures and pressures
• Interface level measurement

Liquid level Indicators for low and medium pressures
series ITA-3/6/7

• Components in contact with the media are made of corrosion-resistant stainless steel (1.4571) as standard equipment.
• Pressure ranges from 16 to 64 bar (nominal)
• DIN or ANSI connector flanges
• Versions up to 12m long ( in two sections )
• Special materials for special application parameters:
• Titanium, Hastelloy C4, Inconel 625, 1.4539 steel alloy
• PTFE-lining (16-bar version only)
• Accesories: drain and vent flanges, valves, reducers etc.
• Types: ITA-3.0/6.0/7.0 with carbon steel flanges

Liquid Level Indicators made of plastic
Type ITA-8

• In utility and waste water applications or when handling corrosive media, liquid level gauges made of plastic avoid expensive design features like metal tube linings and ceramíc or glass tubes
• Materials: PVC (Polyvinyl chloride) - PP (Polypropylene) - PVDF (Polyvenyldene flouride)
• Connection flanges from 15mm / 6bar to 32mm / 6bar

Liquid Level Indicators
High pressure series ITA - 10/11/12/13

• Applications in the chemical industry, industrial processes and offshore operations
• Sealed float up to 320bar or open float
• Minimum operating density 0.42 kg/dm³
• Special materials according application conditions:
• Titanium, Hastelloy C4, Inconel 625, 1.4539 steel alloy
• Rated pressures from 100 to 320 bar
• DIN or ANSI standard connection flanges
• Accesories: drain and vent flanges, valves, reducers etc.